Heat & Chemical Resistant Coatings

Contact Us

Toll Free 1.800.747.1084
Local 309.523.2121

EMAIL CUSTOMER SERVICE

Heat Resistant Coatings

Coatings That Can Take the Heat (Or the Chemicals)

Looking for heat-resistant coatings that stand up to high temperatures? You’ve come to the right place. Need coatings that resist corrosion from fluids, chemicals or other environmental conditions? Sandstrom has just what you need to protect whatever needs protecting from corrosion or other environmental conditions that could compromise your ultimate success. And if we don’t have it, we’re ready to partner with you to design and produce exactly what you’re looking for.

Click a product below to learn more

Heat Resistant Coating (L277) is a single component inorganic waterborne system. This heat cured coating may be applied to a wide variety of metal substrates to offer resistance to high heat, friction, wear, galling and seizing.

L277 is formulated for extreme environments where temperature, nuclear radiation and vacuum preclude the use of organic materials.

DOWNLOAD

Heat Resistant Coating (L278) is a single component inorganic waterborne system. This heat cured coating may be applied to a wide variety of substrates to offer resistance to high heat, friction, wear, galling and seizing.

L278 is formulated for extreme environments where temperature, nuclear radiation and vacuum preclude the use of organic materials.

L278 is offered in both a Black and Gray option. Use the Black as a primer coat for the Gray when coating properties are desired for the application. L278 is not recommended for corrosion protection

DOWNLOAD

Heat Resistant Coating (L279) is a single component inorganic waterborne system. This heat cured coating may be applied to a wide variety of substrates to offer resistance to high heat, friction, wear, galling and seizing. L279 is not recommended for corrosion protection.

L279 is formulated for extreme environments where temperature, nuclear radiation and vacuum preclude the use of organic materials.

DOWNLOAD

Sandstrom HI-T 650 Solid Film Lubricant is a lacquer-like coating containing molybdenum disulfide and corrosion-inhibiting pigments with a silicone vehicle. It is a specialized product designed to prevent galling and provide long wear life at high temperatures (500°F to 750°F) exceeding the operational ranges of Sandstrom 9A and 28A. Higher pigment loading protects all metals from galling, fretting, and seizing. This SFL exhibits extremely low friction and anti-galling characteristics at loads in excess of 100,000 psi. It may be applied by spray or dip. Complete application instructions are on the reverse of this sheet. Each batch is tested and conforms to the requirements of the latest revision of PWA 550.

DOWNLOAD

Therm-O #840 is a heat cure coating designed for heat resistance at continous 500°F temperatures. It cures in as little as one hour resulting in serious hardness and color stability performance.

DOWNLOAD

Addition of heat resistant resins offers lubricity for higher temperatures.
Continuous Operating Temperature Up to: 500°F.
Intermittent Temperature Up to: 600°F.
Mold Release Performance Properties.
Excellent Hardness.

DOWNLOAD
The #8558 Aluminum Baking Finish Kit consists of:

  • 4 Parts Component A (E860-000) Epoxy Resin
  • 1 Part Component B (E860-M16) Pigment
  • 3 Parts Component C (G110-C01) Catalyst Thinner

Aluminum Baking Finish #8558 components can be combined to form two types:

  • Type I – Thinned form (three-component)
  • Type II – Two-component form
  • Use Type as specified on drawing, when applicable.
  • Product components listed on Hamilton Sundstrand MS37.18 as UNS 8559, UNS 8560, UNS 1100.
DOWNLOAD

SA61D is a single-component epoxy baking enamel formulated specifically to provide protection from corrosion as well as chemicals and fluids. The special pigmentation eliminates the need for prime coating. It is specified to Sundstrand MS37.20 and Westinghouse 32213AX.

DOWNLOAD

26AV-10 is an air drying single component epoxy coating formulated to provide excellent fluid resistance and corrosion protection. This product has the same resin system as the original Sandstrom 26A SFL, a material which obtained a proven track record through decades of industrial and military applications around the world.

DOWNLOAD

9AV-35 Mod 1 is a single-component epoxy coating formulated to provide excellent fluid resistance and corrosion protection. It can be applied by spray or dip and must be heat cured.

DOWNLOAD

Sandstrom #329 is a single component, waterborne, inorganic heat-curing coating that may be applied to a wide variety of metals. It is intended for use on components that will operate in environments where properties of organic materials are not desired.

DOWNLOAD

Product Help Form

SEE MORE

Safety & Technical Data Sheets

SEE MORE

Specifications Search

SEE MORE

Request a Quote

For Heat & Chemical Resistant Coating

“Sandstrom’s 099 coating sprays so much better than other coatings that conforms to the MIL-PRF-46010 specification and is easy to work with being a waterborne coating”

Ron, South Bend, IN

“We have worked with Sandstrom Products for a little more than ten years. While their products are extraordinary, it is their customer service that makes them a premier… read more

Ken, Phoenix, AZ

“In 2012 we were looking to add heat cured Solid Film Lubricants to our capabilities as a Dry Film Lubricants applicator. I contacted Sandstrom Products for a quote on material… read more

Brian, San Jose, CA