Excellent Chemical and Mar Resistance AND Corrosion Protection: 2500+ hours Aluminum, 700 hours Steel, 150 hours Bare Steel.
Coefficient of Friction: 0.04 – 0.12 (color dependent).
Operating Range: -320°F to +500°F.
Waterborne, Low VOC.

Sandstrom Poxylube® #874 is a heat curing, single component epoxy / phenolic coating formulated with PTFE. It lubricates with excellent corrosion protection and fluid resistance. This coating shares the same resin system as Sandstrom 9A, a material with a proven track record through over 50 years of military and industrial applications worldwide.

Sandstrom Poxylube #890 Dry Film Lubricant is a single component epoxy formulated with FEP to provide lubrication, fluid resistance and release properties.

Poxylube® #887 Dry Film Lubricant is a single component epoxy formulated with PTFE to provide coating, fluid resistance and corrosion protection. This heat cured material prevents corrosion, galling, seizing and fretting. Once Poxylube® #887 has been applied to a properly prepared surface and allowed to cure, it is virtually unaffected by atmospheric and fretting corrosion, solvents, acids, oils and degreasers. Poxylube® #887 can be applied to all metallic and nonmetallic surfaces by spray or dip application.

Durable coating for rugged applications needing UV and Abrasion Resistance.
Taber Abrasion Loss: only 126 mg / 1000 cycles.
Operating Range: -300°F to +400°F.
Thin film with high coverage rate.
Tough Pencil Hardness: F.
Satin Acrylic Enamel.

Addition of heat resistant resins offers lubricity for higher temperatures.
Continuous Operating Temperature Up to: 500°F.
Intermittent Temperature Up to: 600°F.
Mold Release Performance Properties.
Excellent Hardness.

Acrylic Enamel coating for use in either dip spin or spray applications.
Operating Range: -300°F to +400°F.
Tough Pencil Hardness: H.
Resilient, Glossy Finish.
Great for fasteners.

Unique blend of MoS2, PTFE and Corrosion Inhibiting Pigments for superb performance.
Superior Corrosion Protection: 1500 hrs Manganese Phos., 1000 hrs Zinc Phos.
Excellent Chemical and Fluid Resistance, including Skydrol and Brake Fluid.
Apply by Dip, or thinned form available for Spray application.
Proven over 30 years in the automotive industry.
Operating Range: -320°F to +500°F.
Great wear life: 60 – 100 min.

Adheres even if the substrate is damaged, as displayed on U.S. Navy dive equipment.
Great Corrosion Protection: 500 hours Steel*, 198 hours Iron Phosphate*.
Operating Range: -320°F to +400°F.
LOX Compatible.

POXYLUBE 303 is a high performance 2 component water reducible urethane.

Poxylube® #820 Dry Film Lubricant is a single component epoxy formulated with PTFE to provide excellent coating, fluid resistance and corrosion protection. This Air Drying material prevents corrosion, galling, seizing and fretting.

Sandstrom Poxylube® #835 is an environmentally safe coating to apply when VOC restrictions, part size or substrate composition prohibit the use of Sandstrom solvent-borne and/or heat-cured Poxylube® PTFE products.